|
|
|
 |
|
|
Environmental protection Mobile Plastic
Waste Container Standard product characteristics introduction |
 |
| 1.The waste
containers are made of HDPE. The plastic wall is 3.5 mm thick at least,
the degree of hardness test attains 48. 2.The raw material absorbs water lower than 0.01, to insure its construction won’t get flimsiness or transform. 3.It is easy to wash. The moving tires’ diameter is 195 mm and tires’ width is 30 mm. And the rubber degree of hardness test (Rockwell Hardness Shore A) attains 65±5, each tire’s loading ability attains 40 kg. The disposing process actions steady 4.Through steel axle that electroplate the zinc (FeSn8C AS1789-1984 Type C) to make the axle harder and enduring. 5.In condition of normal using the product, service life betweens 2-3 years. Because make with 100% original material, high definition (HDPE) with mold/pcs casting craft, insure the container more enduring. The material is stable, heat-resisting, frost-resistant. A special component is inside the material, can maintain the container of its own color. |
|
